Emerson CF620AP00, Руководство пользователя

Страница: 7 / 16

7
U.L. Model No.: CF620
14.
Engage the connector of the switch housing
assembly with the motor connector (Figure 10).
The two connectors are keyed and color-coded
and must be mated correctly (color-to-color)
before they can be engaged. Make sure the
connector latch closes properly (Figure 10).
NOTE: Make sure all wires and connector are
tucked under the switch housing assembly and
not pinched between the switch housing
assembly and lower housing.
15. Remove the three #8 - 32 x 8mm flat head
screws from the switch housing assembly
(reserve for later use) for assembly of the switch
housing assembly to the lower housing (Figure
11).
16.
Position the switch housing assembly onto the
lower housing, aligning each of the the three
holes. Replace the three #8 - 32 x 8mm flat head
screw (removed previously) and tighten all three
screws to secure the switch housing assembly to
the lower housing. (Figure 11).
How to Put Your Ceiling Fan Together
(continued)
SWITCH HOUSING
ASSEMBLY
SWITCH HOUSING
ASSEMBLY CONNECTOR
MOTOR
CONNECTOR
Figure 10
SWITCH HOUSING
ASSEMBLY
#8 - 32 x 8mm FLAT
HEAD SCREW (3)
LOWER HOUSING
Figure 11