Emerson CF620AP00, Руководство пользователя

Страница: 3 / 16

3
Unpacking Instructions
1.
Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.
a. Fan motor assembly
b. One hanger bracket
c. One hanger ball/4.5” downrod assembly
d. One ceiling cover
e. One coupling cover
f. Five fan blades flanges
g. One lower housing
h. One switch housing assembly
l. One loose parts bag containing:
1. One clevis pin
2. One hairpin clip
3. Two #8-32 x 1-1/4” threaded studs
4. Two #8 external tooth lockwashers
5. Two #8-32 knurled knobs
6. Twenty-one #10 - 24 x 12mm washer head screws
7. Twenty-one 16mm flat washers
8. One #8 - 32 x 8mm pan head screw
9. One 1/4 - 20 x 14mm pan head screw with
lockwasher
10. One #8 - 32 x 8mm flat head screw
11. Three wire connectors
12. One pendant with pull chain and coupling
13. One balancing kit
This Manual Is Designed to Make it as Easy as Possible for You to Assemble,
Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver One stepladder
One 1/4” blade screwdriver One wire stripper
MATERIALS
Wiring outlet box and box connectors must be of
type required by the local code. The minimum wire
would be a 3-conductor (2-wire with ground) of the
following size:
Installed Wire Length Wire Size A.W.G.
Up to 50 ft. 14
50-100 ft. 12
Before assembly your ceiling fan, refer to section
on proper method of wiring your fan (page 9).
If you feel you do not have enough wiring
knowledge or experience, have your fan installed
by a licensed electrician.
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
B. HANGER
BRACKET
C. HANGER BALL/
4.5" DOWNROD
ASSEMBLY
G. LOWER HOUSING
H. SWITCH
HOUSING
ASSEMBLY
F. FAN BLADE
FLANGES
E. COUPLING
COVER
D. CEILING
COVER
I. LOOSE PARTS BAG
A. FAN MOTOR
ASSEMBLY
WARNING
!
WARNING
!
WARNING
!
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
2. Remove and discard the two cardboard shipping
retainers securing the motor hub in the motor
housing assembly.
3.
Remove the fan motor assembly from the
protective plastic bag. Place all carton contents on
a protective surface.
U.L. Model No.: CF620