background image

10

Fan Speed and Direction

FAN SPEED 
PULL CHAIN

PULL CHAIN COUPLING

WOOD PENDANT

PULL CHAIN

Figure 17

FAN SPEED PULL 
CHAIN

REVERSE SWITCH

Figure 18

1.

Assembly of the ceiling fan is now complete.
Restore electrical power to the branch circuit at the
fuse box or breaker panel.

2.

Connect the fan speed pull chain to the wood
pendant with pull chain. (Figure 17).

3.

All fans are shipped from the factory with the
reversing switch positioned to circulate air
downward. 

4.

If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then slide the reversing switch, located on top of
the fan motor assembly, to the opposite position
(Figure 18) and turn the fan on again. The blades
will turn in the opposite direction and reverse the
airflow.

Reverse Switch Information

Season

Rotation Direction

Switch Position

Summer

Counter-Clockwise

Right

Winter

Clockwise

Left 

U.L. Model No.: CF620

Accessories

This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.

The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.

1.

Ceiling Fan/Light Controls (see store or catalog).

2.

Downrod Extension Kits (see store or catalog).

3.

Ceiling Fan Light Kits (see store or catalog).

WARNING

!

WARNING

!

Maintenance

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.

Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.

Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.

WARNING

!

Содержание CF620AP00

















Отзывы: