8. Wall Control Installation
(Continued)
3-WAY WIRING DIAGRAM:
NEW CONSTRUCTION
NOTE: Retrofit 3-way installations are likely to include
two traveler wires between the two wall boxes. In new
construction, only one traveler wire Is required (See
Figure 30).
8.15
Screw the SW605 wall control into wall box using the
supplied screws. Leave wall control in “OFF” mode until
fan installation is completed.
8.16
Next, install the other SW605 wall control into the wall box
containing the load wire. Connect the black wire of the
SW605 wall control to the traveler wire(s) already
connected to the black wire (in the other wall box). Secure
with wire connectors supplied.
8.17
Connect one black wire of the SW605 wall control to the
“load” (black) wire and secure with wire connector
supplied.
8.18
Connect one black wire of the SW605 wall control to both
remaining traveler wires in the wall box and secure with
wire connector supplied.
8.19
Screw the SW605 wall control into wall boxes using the
supplied screws. Leave the SW605 wall control in “OFF”
mode until fan installation is completed.
Figure 30
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
WARNING
!
STANDARD WIRING FOR EXISTING
3-WAY CONTROLS
HOT
BLK
TRAVELER WIRES
B
L
A
C
K
LOAD
EXISTING
WALL CONTROL
SW605
FAN/LIGHT
WALL
CONTROL
BLK
B
L
A
C
K
LOAD
TRAVELER
WIRES
HOT
BLK
BLK
SW605
FAN/LIGHT
WALL
CONTROL
BLK
3-WAY WIRING DIAGRAM: RETROFIT
8.20
The SW605 wall control is supplied with a white, ivory, and
almond color switch covers. Choose the finish that best
suits your needs and snap the cover onto the SW605 wall
control (Refer to Figure 28).
8.21
Install decorator wall plates using the two screws provided
with wall plate. Leave the SW605 wall control in “OFF”
mode
until
fan
installation
is
completed
(Refer to Figure 28).
21
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF5200
BP7511-1 CF5200 Penbrooke Select Eco.qxp_ BP7511 2/8/16 12:02 PM Page 21
