Emerson CF279BQ00, Руководство пользователя

Страница: 7 / 84

7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF279
8" DOWNROD
80" FAN MOTOR
WIRES (5)
Figure 6
3.6
Separate, untwist and unkink the Five 80” Motor Wires.
Route the Five 80” Motor Wires through the 8” Downrod
(Figure 6).
MOTOR
COUPLER
8"
DOWNROD
LOOSEN
PHILLIPS HEAD
SET SCREWS (2)
Figure 7
3.7
Loosen the two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 7).
Seat the Downrod in the Motor Coupler (Figure 7).
Rotate and align the Downrod holes with the two holes
in the Motor Coupler (Figure 7).
3. Ceiling Fan Assembly
(Continued)
HAIRPIN
CLIP
CLEVIS
PIN
MOTOR
COUPLER
CLEVIS
PIN
HAIRPIN
CLIP
Figure 8
3.8
Slide the Clevis Pin through the Motor Coupler holes.
Install the Hairpin Clip through the Clevis Pin holes to
secure (Figure 8).
NOTE: The Clevis Pin must go through the holes in
the Motor Coupler. It is critical that the Clevis Pin is
properly installed and secure.
It is critical that the clevis pin and hairpin clip in the
motor coupler are properly installed and secured.
Failure to verify that the pin is properly installed could
result in the fan falling.
WARNING
!