manualshive.com logo in svg

Emerson Branson LPX, Инструкция по эксплуатации

Поделиться
Скачать
Emerson Branson LPX Скачать руководство пользователя страница 21

100-412-196 REV. 06

11

1.6.2 Record Information About the Problem

Before sending equipment for repair, record the following information and send a copy of it

with the equipment. This will greatly increase Branson’s ability to address the problem. 

1. Describe the problem; provide as much detail as possible. For example, is the problem

intermittent? How often does it occur? How long before it occurs after powering up?
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________

2. Is your equipment in an automated system?

____________________________________________________________________________
____________________________________________________________________________

3. If the problem is with an external signal, which signal?

____________________________________________________________________________
____________________________________________________________________________

4. If known, include plug/pin # (e.g., P29, pin #3) for that signal:

____________________________________________________________________________
____________________________________________________________________________

5. What are the Weld Parameters?

____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________

6. What is your application? (Type of weld, plastic material, etc.):

____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________

7. Name and phone number of the person most familiar with the problem:

____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________

Contact the Branson office prior to shipping the equipment.
For equipment not covered by warranty, to avoid delay, include a Purchase Order.

Send a copy of this page with the equipment being returned for repair.

Содержание Branson LPX

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды