Emerson AXP640-AC2-110VAC, Инструкция по установке и использованию

Страница: 167 / 190

Safety Notes
AXP640 Installation and Use (6806800M24E)
167
To ensure proper cooling and undisturbed airflow through the system always operate the
system in a horizontal position and keep clear at least 60 mm at the back of the system. Do not
obstruct the ventilation openings at the top and back of the system. Keep the fresh air intake
at the bottom front side of the chassis completely clear, and ensure that fresh air supply is not
mixed with hot exhaust from other devices.
To ensure proper air flow within the system make sure that all slots are populated with either
filler blades, blades or dummy blades.
Product Damage
High humidity and condensation on blade surfaces causes short circuits.
Do not operate the system outside the specified environmental limits. Make sure the system is
completely dry and there is no moisture on any surface before applying power. Do not start the
system below 0ºC.
Injury
Caution: this unit has four -48V to -60V DC feeds. All must be disconnected to de-energize the
system. To reduce the risk of injury, disconnect the feeds when removing power from the
system.
System Damage
Air Filter
Air contamination can pollute the air filter and obstruct the air intake of the system which may
cause system overheating and component damage.
To guarantee proper airflow through the system, the air filter has to be replaced at least every
six months. Emerson recommends to replace the air filter every 90 days. Filter replacement
frequency depends on the environment the system is subjected to.
Because central offices vary in physical location and cleanliness, check your air filters every
week after you first install your system. In a dusty environment, a filter may need cleaning
more often than a filter in a cleaner environment. Check the filters frequently until you have a
good idea of how often it needs cleaning. Based on your findings, establish a regular cleaning
schedule and keep a log to record the date of each filter cleaning or replacement.