17
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF717
11. Installation of Light Kit Assembly
(continued)
11.7
Cut the speed control switch pull chain and the light
switch pull chain to the desired lengths.
Connect the wood pendants (supplied) to the pull chains
by sliding the pendants (small hole first) onto the pull
chains.
Then attach the chain couplings (supplied) to the end of
the chains and allow the pendants to fall down over the
couplings.(Figure 29).
SPEED CONTROL
SWITCH PULL CHAIN
LIGHT CONTROL
SWITCH PULL CHAIN
COUPLING
COUPLING
LARGE WOOD
PENDANT
SMALL WOOD
PENDANT
Figure 29
Please call Emerson technical support at
1-800-654-3545 if you have any questions
about installation and operation of this ceiling fan.
12.1
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.
Check the operation of the light by gently pulling on
the light switch pull chain (Figure 30).
Check the operation of the fan by gently pulling on the
speed control switch pull chain (Figure 30).
The operation sequence is as follows:
1st pull - High
2nd pull - Medium
Your fan is shipped from the factory with the reversing
switch positioned to circulate air downward. If airflow
is desired in opposite direction, turn the fan off and
wait for the blades to stop turning, then slide the
reversing switch to the opposite position, and turn the
fan on again (Figure 30). The fan blades will turn in
the opposite direction and reverse the airflow.
12. Using Your Ceiling Fan
SPEED CONTROL
SWITCH PULL CHAIN
LIGHT CONTROL
SWITCH PULL
CHAIN
REVERSING
SWITCH
3rd pull - Low
4th pull - OFF
Figure 30
BP7483 ASHLAND CF717 12/19/13 9:59 AM Page 17
