5
ASCO NUMATICS™
Visit our website at ASCO.com or contact us at (800) 972-2726
SERIES
617
INSTALLATION
MANUAL
Analog Target Value - Output Pressure
Setpoint Onset
The maximum adjustment range for the zero point is from 0% to +100%.
Setpoint span
The pressure range of the target value can be changed using the DaS software. To do this, in the section “Setpoint
setting” switch to “Customer”. The adjustment range for the pressure is 10% to 200%.
WARNING: Output pressures greater than the PMR (Pressure Maximum Range) will not be regulated by the valve,
i.e. the maximum output pressure is limited to the PMR.
In order to prevent damage to the sensor, the supply pressure should always be less than the maximum input
pressure (MAP) (see table).
Maximum Output
Pressure
PMR (psi)
Maximum Input
Pressure
MAP (psi)
50
90
100
140
150
190