background image

2

Model No.: ACF765

WARNING

To avoid fire, shock, and serious personal injury, follow these instructions.

Safety Instructions

1.

5HDG\RXURZQHU·VPDQXDOFDUHIXOO\DQGNHHSLWIRUIXWXUHUHIHUHQFH

2. Before servicing or cleaning unit, switch power off at fuse box and lock to prevent power 

IURP

 being switched

on accidentally. When the fuse box cannot be locked, securely fasten a warning device, such as a tag, to the
fuse box.

3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to

the ceiling fan before servicing.

4. Do not put anything into the fan blades while they are turning.

5.

'RQRWRSHUDWHUHYHUVLQJVZLWFKXQWLOIDQEODGHVKDYHFRPHWRDFRPSOHWHVWRS

Additional Safety Instructions for Installation

1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan

without blades.

2. All wiring 

PXVW

 be in accordance with AS/NZS 3000 “The Wiring Rules”. The ceiling fan 

PXVW

 be grounded as a

precaution against possible electrical shock. Electrical installation should be 

PDGH

 or approved by a licensed

electrician.

3.

7KHFHLOLQJMRLVWPXVWEHVHFXUHO\PRXQWHGDQGFDSDEOHRIUHOLDEO\VXSSRUWLQJDWOHDVW.J

4. The  downrod  furnished  with  the  fan  provides  the 

PLQLPXP

 

UHFRPPHQGHG

  floor  to  fan  blade  clearance  for  a

PFHLOLQJ

5. The fan 

PXVW

 be 

PRXQWHG

 with the fan blades at least 2.1 

PHWHUV

 

IURP

 the floor to prevent accidental contact

with the fan blades.

6. Your  licensed  electrician 

PXVW

  follow  the 

UHFRPPHQGHG

  instructions  for  the  proper 

PHWKRG

  of  wiring  your

ceiling fan.

NOTE:

This fan is not suitable for use with solid-state speed controls.

WARNING:

To  reduce  the  risk  of  fire  or  electric  shock,  this  fan  should  only  be  used  with  fan  speed  control

supplied.

WARNING:

This product is designed to use only those parts supplied with this product and/or any accessories

designated specifically for use with this product by 

(PHUVRQ

 Electric Co. Substitution of parts or accessories not

GHVLJQDWHGIRUXVHZLWKWKLVSURGXFWE\(PHUVRQ(OHFWULF&RFRXOGUHVXOWLQSHUVRQDOLQMXU\RUSURSHUW\GDPDJH

WARNING:

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges,

balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

WARNING:

To  reduce  the  risk  of  electrical  shock,  this  fan 

PXVW

  be  installed  with  an  isolating  wall

control/switch.

WARNING

DATE CODE:

The date code of this fan may be found on the box, stamped in ink on a white label.
You should record this data above and keep it in a safe place for future use.

THIS FAN IS SUITABLE FOR DAMP LOCATIONS SUCH AS 

COVERED PORCHES, COVERED PA

7,26$1'&29(5(''(&.6

 

ANYWHERE THERE IS A ROOF OVERHEAD.

Содержание ACF765BQ












Отзывы: