Emerson 8800A, Руководство по эксплуатации продукта

Страница: 140 / 160

Rosemount Model 8800C Vortex Flowmeter
C-8
Online device disconnected with unsent data. RETRY or OK to
lose data. There is unsent data for a previously connected device. Press
RETRY to send data, or press OK to disconnect and lose
unsent data.
Out of memory for hotkey configuration. Delete unnecessary
items. There is no more memory available to store additional
hot key items. Unnecessary items should be deleted
to make space available.
Overwrite existing configuration memory. Requests permission to overwrite existing configuration either by a
device-to-memory transfer or by an offline configuration. User
answers using the soft keys.
Press OK. Press the OK soft key. This message usually appears after an error
message from the application or as a result of HART
communications.
Restore device value? The edited value that was sent to a device was not properly
implemented. Restoring the device value returns the variable to its
original value.
Save data from device to configuration memory. Prompts user to press SAVE softkey to initiate a device-to-memory
transfer.
Saving data to configuration memory. Data is being transferred from a device to configuration memory.
Sending data to device. Data is being transferred from configuration memory to a device.
There are write only variables which have
not been edited.
Please edit them. There are write-only variables which have not been set by the user.
These variables should be set or invalid values may be sent to the
device.
There is unsent data. Send it before shutting off? Press YES to send unsent data and turn the HC off. Press NO to turn
the HC off and lose the unsent data.
Too few data bytes received. Command returns fewer data bytes than expected as determined by
the device description.
Transmitter fault. Device returns a command response indicating a fault with the
connected device.
Units for <label> has changed. Unit must be sent before editing,
or invalid data will be sent. The engineering units for this variable have been edited. Send
engineering units to the device before editing this variable.
Unsent data to online device. SEND or LOSE data. There is unsent data for a previously connected device which must be
sent or thrown away before connecting to another device.
Use up/down arrows to change contrast. Press DONE when
done. Gives direction to change the contrast of the HC display.
Value out of range. The user-entered value is either not within the range for the given
type and size of variable or not within the min/max specified by the
device.
<message> occurred reading/writing <label> Either a read/write command indicates too few data bytes received,
transmitter fault, invalid response code, invalid response command,
invalid reply data field, or failed pre- or post-read method; or a
response code of any class other than SUCCESS is returned reading
a particular variable.
<label> has an unknown value. Unit must be sent before editing,
or invalid data will be sent. A variable related to this variable has been edited. Send related
variable to the device before editing this variable.
Message Description