Document Part # 026-4842 Rev 1
Page 2 of 4
©2017 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
P/N 814-3560
• Black/Red: 9 to 30 VAC; 12 to 40 VDC
• Yellow: No Connection
P/N 814-3570
• Black: 120V to 277V VAC; 50/60 Hz
• White: Neutral
• Red: No Connection
Note: It may be easier to configure the Repeater and Modules before mounting the devices.
Set Up the Repeater
• The setup interface has two buttons,
Menu
and
Set
. Each has a corresponding three-color LED (green, amber, red).
• The buttons and LEDs are used to navigate and select linking and setup options through a three-tier menu system consist-
ing of different Modes>Menu>Options.
• The LEDs respond by showing solid or blinking lights of different colors to indicate active options and pending changes.
• The illustration and legend below describe how the buttons are used and the meaning of the LED responses.
1. Power up the Repeater. It will initiate the startup LED sequence.
2. Configure the device as a Repeater.
3. Link any 3rd party transmitters.
Configure the Repeater
Note: The Emerson Wireless Repeater comes pre-configured as a 1 Hop repeater.
1. Access the Advanced Setup menu by holding down both buttons for five (5) seconds until both LEDs turn amber.
