Page 3 of 6
Document Part # 026-4855 Rev 0
©2022 Emerson Digital Cold Chain, Inc. This document may be photocopied for personal use.
Visit our website at www.climate.emerson.com for the latest technical documentation and updates.
5. Locate the input dip switch for the sensor point, and set to the OFF position (LEFT for MultiFlex, DOWN for 16AI). Refer to
the input board’s user manual for locations of the input dip switches.
*Temperature models only
Operations
Emerson wall-mounted humidity sensors measure the levels of RH and temperature (if equipped) in the air inside a
room. To maintain accurate functionality, keep all pickup vents clear and free of dust, debris, etc.
LEGEND
RTD
RTD*
T/RTD
RTD/Temperature*
RH
Humidity
GND
GRND (DC- or AC1 and Output Common)
PWR
POWER (DC+ or AC2)
