Emerson Quiet Kool 19 SEER Series, Руководство пользователя, Страница: 20 / 32

17
OPERATING INSTRUCTIONS
I FEEL function (Optional)
I FEEL
1. This function helps carry away the accumulated dirt,
bacteria, etc from the indoor evaporator.
2. This function will run about 30 minutes, and it will
return to the pre-setting mode .You can press
button to cancel this function during the process.
You will hear 2 beeps when it's finished or cancelled.
3. It's normal if there is some noise during this function
process, as plastic materials expand with heat and
contract with cold.
4. We suggest operating this function at the following
ambient conditions to avoid certain safety protection
features.
5. It's suggested to utilize this function every 3 months.
SELF-CLEAN function (Optional)
Press I FEEL button to active the function, the
will appear on the remote display.
Do it again to deactivate this function.
This function enables the remote control to measure
the temperature at its current location, and send this
signal to the air conditioner to optimize the temperature
around you and ensure the comfort.
It will automatically deactivate 2 hours later.
Indoor unit
Outdoor unit
Temp< 86 (30 )
41 (5 )<Temp<86 (30 )
To active this function, press and
button at the same time, until hear a beep from indoor unit.
Only optional for heating pump inverter appliance.
MUTE function (Optional)
MUTE
1. Press MUTE button to active this function, and
will appears on the remote display.
Do it again to deactivate this function.
2. When the MUTE function runs, the remote controller
will display the auto fan speed, and the indoor unit
will operate at lowest fan speed to be quiet feeling.
3. When press FAN/TURBO/SLEEP button, the MUTE
function will be cancel. MUTE function can not be
activated under dry mode.