Emerson Quiet Kool 19 SEER Series, Руководство пользователя, Страница: 13 / 32

10
Replacement of Batteries
Remove the battery cover plate from the rear of the remote control, by sliding it in the direction of the arrow.
Install the batteries according the direction (+and -)shown on the Remote Control.
Reinstall the battery cover by sliding it into place.
Use 2 pieces LRO3 AAA (1.5V) batteries. Do not use rechargeable batteries.
Replace the old batteries with new ones of the same type when the display is no longer legible.
Do not dispose batteries as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.
1. Direct the remote control toward the Air conditioner.
2. Check that there are no objects between the remote control
and the Signal receptor in the indoor unit.
3. Never leave the remote control exposed to the rays of the sun.
4. Keep the remote control at a distance of at least 1m from the
television or other electrical appliances.
Note
Please remove batteries
to avoid leakage damage
when not using for a long
time.
Signal
receptor
REMOTE CONTROL
For some model of remote controller, open the battery cover, and you can see the manual switch
at the bottom, then you can select the Cooling only or Heating pump, operate as below,
DIP switch on position Function
The display is adjusted in degree celsius
The display is adjusted in only cooling mode
The display is adjusted in cooling and heating mode
The display is adjusted in degree fahrenheit.
Cool
Heat
C
F
+
+
+