Emerson Network Power RDU-S, Руководство пользователя

Страница: 35 / 53

Chapter 5 Software Operation 31
RDU-S Rack Data Unit User Manual
Figure 5-31 Network window
Email
Click the Email node, and the window shown in Figure 5-32 will appear.
You can configure the Email sending function, including Email server IP address, port, using SSL or not, and Email
addresses of sender & receiver, and separately test the Email serving function of the data unit through the window.
Email server port default: If SSL is not used, the port number is 25; If SSL is used, the port number is 465.
z
If you have not modified the port number, when you check or uncheck SSL, the port number will be switched
between 465 and 25.
z
If you have set other port number manually, when you check or uncheck SSL, the port number will always be the
user-defined value, not being changed.
1. SMTP server
Click the SMTP Server tab, and the window shown in Figure 5-32 will appear.
As shown in Figure 5-32, type the corresponding configuration values of the parameter items and click Apply to
complete the configuration.
Figure 5-32 SMTP server window
2. Recipients
1) Click the Recipients tab, and the window shown in Figure 5-33 will appear.
Figure 5-33 Recipients window