emerio PH-128351, Инструкция по эксплуатации

Страница: 6 / 42

- 5 -
PH-128351 EN
DESCRIPTION OF THE APPLIANCE
1. Heater head / radiant part
2. On/off button
3. Pole
4. Base
PACKAGING
⚫
After unpacking the appliance, check for transport damage and completeness!
⚫
Do not discard the original box! It can be used for storage and dispatch in order to
avoid transport damage.
⚫
Dispose of the packing material in a proper manner. Plastic bags should be kept
away from children.
TO ASSEMBLE, FOLLOW THESE INSTRUCTIONS
1) Fix one of the down poles (B2) on the base by clockwise rotation, then pass the cable through the base and
the down pole (B2).
2) Rotate the rest two down poles (B2) clockwise into the down ploe (B2) mentioned in step 1, then connect
the top pole (B1) by the same way. Run the cable through the whole pole.
3) Connect the plug on the heater head to the power cable plug. Install the cable clip (C) as below. Make sure
the clip (C) is firm and the arrow is up.
* If the cable stuck in the pole please change its angle when passing it through the pole.
Parts Quantity
Heater head 1
Top pole (B1) 1
Down pole (B2) 3
Base 1
Screws 2
Cable clip (C) 1