936mm
385mm
555mm
650mm
143mm
311mm
180mm
109mm
DIMENSIONS
LOCATIONS TO AVOID
Areas with high salt levels, corrosive gas, or mineral oils.
Near flammable items.
Locations with serious power supply voltage fluctuation.
Unstable locations such as cars, mobile homes and cabins.
Places with strong electromagnetic waves.
Environments with especially hash environmental conditions.
INSTALLATION CHECK
1. Confirm the model, number, name etc to avoid incorrect
installation.
2. Ensure there is enough space for installation and maintenance.
3. Dry, well ventilated location, without obstructions to the air inlet
and outlet.
4. The installation surface is suitable to avoid electric shocks.
5. The power supply and and wire diameter capacity are in
accordance with the electrical installation requirements.
6. Electrical work must be insulated and compliant with electrical
technical standards.
7. The unit must be powered for 3-4 hours before use.
INSTALLATION SPACE
1. Check space for maintenance before installation.
2. There are no obstacles within 1 meter of the front of the heat pump.
3. The space beside the water pipe can be increased if required.
HOISTING HEAT PUMP
1. Use four or more soft lifting belts to lift the heat pump.
2. Avoid scratches and damage to the surface of the unit by using
the protective plates when moving.
3. Ensure the foundation is suitable before moving the unit.
4. Consider the drainage channel at the base as the heat pump will
produce condensation water.
5. Affix the shock absorber to the base.
INSTALLATION
1730mm
177
715.5mm
143.
75
0
410
228.5
150
251.5
130
.5
95
0
515
Drainage
Water temperature sensor
Circulation input
Circulating output
Cold water inlet
Hot water outlet
TPR valve
759
A
A
A-A
B
B
B-B
30
°
Hoisting diagram
Horizontal installation space (units mm)
