HEAT PUMP WATER HEATER
USER MANUAL
SAFETY MEASURES
Do not insert any objects or obstruct the air inlets and outlets. The high speed internal rotor could cause damage or injury.
In the event of any unusual activity, such as a burning smell, turn off the manual power switch immediately and contact a
authorised service technician.
When the unit needs to be repaired, removed or re-installed contact an authorised service technician.
Do not install the unit where there is potential for combustable gas leaks as it may cause a fire.
Confirm the installation base is strong enough to support the unit prior to install. If the base is not strong enough over
the long term it could cause device failure or injury.
Turn the power off before cleaning the unit.
MODEL NUMBER: EE-HWS-SSHP-200
Thank you for choosing Emerald Energy.
This leaflet contains important information on the correct
installation and operation of your heat pump water heater.
PACKING LIST
1 User manual
1 Heat pump unit
1 Water tank unit
1 TPR valve
1 Condensation drainage pipe
2 Soft connecting pipe
⚠
WARNING For outdoor use only.
Please read all the information before commencing
installation and retain for future reference.
This appliance must be installed, commissioned, and serviced by
an authorised technician in accordance with these instructions.
This unit requires reliable earthing and connection before use.
In areas vulnerable to lightening strikes lightning protection
measures must be carried out.
This unit is not suitable for use in cold winters. Water reserved in
the pipe system must be drained.
POWER SUPPLY:
220V-240V/1N
~
50Hz
ENVIRONMENT TEMPERATURE:
-7
°
C ― 43
°
C
Working water temperature:
Min inlet water temperature 8°C,
Max outlet Water Temperature 60°C. If the system is always used
beyond the available range, please contact with manufacturer
