Locating Beeper Operating Instructions
Version 1.0
Page 4 of 20
Due to high current consumption the receiver battery is quickly
discharged – possibly before the model is found. Because the receiver
set is without energy the Locating Beeper is not supplied with power
anymore. In this situation it is no good as model finder.
The PRO-version of the Locating Beeper contains a battery! It
supplies the Locating Beeper with energy for 2 hours – totally
autarky!
The built in battery is automatically charged as soon as the receiver set
is turned on. Charging lasts approx. 10 minutes for an empty battery
and automatically stops when the battery is fully charged. There are
many advantages by using this new revolutionary battery type:
practically no self discharge and virtually unlimited life span (up to 1
million charging cycles!).
Hint:
The Locating Beeper PRO contains a new revolutionary battery with a
practically unlimited life span! It supplies the electronics with energy for more
than 2 hours and automatically recharges as soon as the receiver is turned back
on.
Due to its autarky supply the Locating Beeper PRO can also serve as
tow rope finder (see chapter 4.3.). Even monitoring the voltage of
electronically systems (up to 8.4V) is possible. As soon as the supply
of the corresponding system fails the Locating Beeper PRO sounds
alarm with its pervading alarm signal. The energy of the internal battery
lasts for 2 hours.
Содержание Locating Beeper
Страница 1: ......
