EMC CLARiiON CX700, Справочник по аппаратуре

Страница: 44 / 114

2-14 CX700 Hardware Reference
Setting Up and Starting a CX700 System
Figure 2-8
Connecting the Copper Cable to the BE 0 SP Port
4. To connect additional DAEs on each loop, cable the LCC EXP
(expansion) port on each DAE to the PRI port on the next LCC on
that loop . Be sure to maintain the division between A and B
components; never connect an LCC A and an LCC B together.
Note that in a typical single-cabinet installation, loops skip over physically
adjacent DAEs, as shown in Figure 2-9. Other configurations allow
daisy-chaining between adjacent DAEs, as shown in Figure 2-11.
You can mix DAE2 and DAE2P enclosures in a storage system and along a
loop.
Figures 2-9 through 2-12 show sample SPE-to-DAE loops, enclosure
addresses, and cabling in one- and two-cabinet configurations.
EMC2293
To other FC device
BE 0
Connector