EMBRON HATTELAND TECHNOLOGY STD X Series, Руководство пользователя

Страница: 42 / 122

42
IND100064-57
Operation
User Controls
Power ON/OFF:
This symbol and all text will illuminate in red when suitable power is connected and the unit is turned off. When the
unit is on and operating, this symbol will illuminate constantly either in yellow color (signal not recognized/not present
and no image on screen) or green color (signal detected and image on screen).
Power ON:
To turn the unit on, verify that the symbol is illuminated in red (indicates suitable power is connected) and touch the
power symbol and hold until the the symbol changes to green light/yellow light or a image appears on the screen.
Power OFF:
To turn the unit off, touch the power symbol and hold until it either illuminates/changes from green/yellow to red or the
image on screen disappears.
OSD Menu, Navigation:
If the OSD (On Screen Display) menu was activated (and is clearly visible on screen), both the “<” and “>” are used to
navigate and set options within the OSD menu
To access the main OSD menu, touch anywhere on the “MENU” circle symbol and the OSD menu will clearly be seen
as an overlay over the existing displayed image. The complete definition of all the menus and functions are available
in the “OSD MENU FUNCTIONS” chapter in this manual.
USER CONTROLS OVERVIEW
The units are designed using Glass Display Control ™ (GDC) touch technology to allow interactivity adjusting
brilliance (brightness) and control power on / off with the use of illuminated symbols. Note that these symbols are only
visible (backlight illuminated) when suitable power is connected, except for the power symbol which has a white silk
print to indicate its position on the front glass. Further, not all symbols are available depending on factory options and
product sizes (where applicable). There are no physical moving knobs, potmeters, wheels or push buttons available as
everything is touch surface controlled by Projected Capacitive technology that allows a human finger (including
several types of gloves) to control the unit.
OSD Menu
Navigation
Back Forward
Brightness &
Decrease/Increase
ECDIS Status / Indicator
Power On/Off + Status
Action Indicators
Light Sensor
Buzzer (3500Hz)