EMBRON HATTELAND TECHNOLOGY STD X Series Скачать руководство пользователя страница 69

Страница: 69 / 122

IND100129-150

Specifications - HD 19T21 STD-xxx-Fxxx

SPECIFICATIONS

Note: All speciﬁ cations are subject to change without prior notice!

Please visit www.hattelandtechnology.com for the latest electronic version.

2/2

• W:429.00 [16.89''] x H:382.00 [15.04''] x D:74.50 [2.93''] mm [inch]

• 4 x M6 VESA mounting 280x150mm, Max 12mm deep

• Weight: 7.8kg / 17.2lbs

• High Quality TFT with LED Backlight

• 19.0 inch viewable image size, Aspect Ratio 5:4

• TFT active-matrix liquid crystal panel

• MVA (Multi-domain Vertical Alignment) LCD Technology

• Native Resolution

: 1280 x 1024

• Pixel Pitch (RGB)

: 0.294 (H) x 0.294 (V) mm

• Response Time

: 35ms (typical), “black” to “white”

• Contrast Ratio

: 1500:1 (typical)

• Light Intensity

: 350 cd/m² (typical)

• Viewable Angle

: +/- 85 deg. (typical) (Up/Down/Left/Right)

• Active Display Area

: 376.32 (H) x 301.056 (V) mm

• Max Colors

: 16.7 million

Multi-power Supply:

• 100&230VAC - 50/60Hz + 24 VDC

- HD 19T21 STD-Mxx-Fxxx

Note: You may connect either AC power or DC power or both. In case both sources

are connected, power will be sourced from the AC input. If AC input is lost, there will

be a uninterrupted switch-over to DC input.

Power Consumption:

• Operating AC/DC Standard

: 33W (typ) - 125W (max)

A P P R O V A L S & C E R T I F I C A T E S

Physical Considerations:

TFT Technology:

TFT Characteristics:

Power Specifications:

This product have been tested / type approved by the following classification societies:

IEC 60945 4th (EN 60945:2002)

IACS E10

ClassNK - Nippon Kaiji Kyokai

GL - Germanischer Lloyd

DNV

- Det Norske Veritas

ABS - American Bureau of Shipping

CCS - China Classification Society

BV - Bureau Veritas

LRS - Lloyd’s Register of Shipping

EU RO MR - Mutual Recognition

Compass Safe Distance: HD 19T21 STD-xxx-Fxxx

Standard: 125cm Steering: 75cm

Resolutions:

• VGA

: 640 x 480 (including 640 x 350)

• SVGA

: 800 x 600 (including 720 x 400)

• XGA

: 1024 x 768

• SXGA

: 1280 x 1024*

* Recommended for optimal picture quality

Note: Other resolutions will be scaled full screen, unit has no scaling support.

Supported Signals:

• Operating

: Temperature -15 deg. C to +55 deg. C

- Humidity up to 95%

• Storage

: Temperature -20 deg. C to +60 deg. C

- Humidity up to 95%

• IP Rating

: Protection: IP66 front - IP22 rear (EN60529)

Lifetime Considerations:

Even though the test conditions for bridge units provide for a maximum

operating temperature of 55°C, continuous operation of all electronic

components should, if possible, take place at ambient temperatures of only

25°C. This is a necessary prerequisite for long life and low service costs.

Behind front bezel - Glass Display Control™ (GDC) IP66:

• Power On/Off, On Screen Display Menu, Brightness Control (-/+)

• Mode Status Indicators (ECDIS, Service)

• Buzzer (not visible), Light Sensor (not visible)

• Projected Capacitive Touch Screen (Multitouch, USB interface)

• Optical Bonding Technology

• Color Calibrated models (ECDIS)

Environmental Considerations:

User Controls:

Factory Options:

• DVI-D Signal IN : 1 x 24p DVI (female)

• RGB Signal IN

: 1 x 15p HD D-SUB (female)

• SCOM RS-422/485 : 1 x 5-pin Terminal Block 3.81, non-iBuzzer

• SCOM RS-232

: 1 x 9p D-SUB (female) non-iBuzzer

• If Touchscreen

: 1 x USB TYPE B Connector (female)

• AC Power IN

: 1 x Std IEC Inlet

• DC Power IN

: 1 x 2-pin Terminal Block 5.08

Signal Terminals:

• HD CMB SX1-A2

: 1 x Console Mount Kit (1-12.75mm). EN60945 Tested

• HD CMB SX1-A3

: 1 x Console Mount Kit (1-12.75mm). EN60945 Tested

Long screws for easier installation in tight spaces.

• HD TMB SX1-B1

: 1 x Table Mount Bracket. EN60945 Tested

• HD VED SX1-A1

: 1 x VESA Bracket, not EN60945 Tested

• JH 19TAP STD-C1 : 1 x Frame Adapter (19" Series 1 to Series X) retrofit

• HD 19TAP SX1-C2 : 1 x Frame Adapter (19" Series X to Series 2) retrofit

• HD REM SX1-A1

: 1 x External Remote Control, EN60945 Tested

• HD 19COV SX1-A1 : 1 x UV Sun Cover
Please see user manual/datasheet for more information

Available Accessories:

Содержание HATTELAND TECHNOLOGY STD X Series



























































































































Результаты поиска

Содержание HATTELAND TECHNOLOGY STD X Series

Отзывы:

Похожие инструкции для HATTELAND TECHNOLOGY STD X Series

Бренды по названию

Популярные бренды

EMBRON HATTELAND TECHNOLOGY STD X Series, Руководство пользователя

Результаты поиска

Содержание HATTELAND TECHNOLOGY STD X Series

Отзывы:

Похожие инструкции для HATTELAND TECHNOLOGY STD X Series

Бренды по названию

Популярные бренды