EMBRON Hatteland HD 12T21 MMC Series, Руководство пользователя

Страница: 37 / 124

37
IND100133-45
Connection area of unit (illustration)
Physical Connections
- +
POWER INPUT:
Connect your DC power cable to the 2-pin Terminal Block 5.08 connector. The internal DC power module supports
24VDC. Please check specifications for your unit.
POWER INPUT:
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input. Please check
specifications for your unit.
GROUNDING SCREW:
Please review “General mounting instructions” in the “Installation” chapter, pt. 7 for more information.
Note for Grounding Screws:
Standard Grounding Screw/Bolt provided by Hatteland Technology is “Pan head screws M4x8mm w/spring and plain
washer”.
Multi-power note: (For units supporting AC & DC input simultaneously)
The unit has a dual input power supply which will accept both AC and DC input. If both inputs are connected, the
unit will be powered by AC. If AC is disconnected it will automatically switch over to DC without affecting the operation
of the unit. This makes it possible to use AC power as primary power and a 24V battery as secondary power,
eliminating the need for expensive UPS systems.
Note: 24 inch unit used as example above, please review specifications for your actual model.
Reduce Cable Tension
To reduce tension on the cables you connect, secure them with
a cable tie to the available chassis hinges located near the
connectors. Note that the actual position of these hinges may
vary depending on the specific unit.
RGB/VGA Out Grounding Screw
PS/2 Keyboard & Mouse In
RS-232 & RS-422/RS-485 COM
Power Inputs DC & AC
USB 1,2,3,4
2 x RJ45 Network
2 x Removable
Storage Trays
DVI-I/RGB Out Mic In & Line Out Expansion Area
for Optional Modules