EMBLEM Easy Airpress Standard 4, Руководство пользователя, Страница: 3 / 28

DATAPLOT GmbH
Gutenbergstraße 15
24558 Henstedt-Ulzburg
Germany
Telephone: +49 4193 995-0 Fax: +49 4193 995-220
support@dataplot.de www.dataplot.de
Page 3 / 28
Thank you for deciding to purchase the EMBLEM Easy Airpress Standard 4. Before
using your new machine please carefully read the safety notes and the
explanations for installation, operation and changing dies in this manual.
1 Safety
1.1 Safety notes
Always disconnect the device from the compressed air supply before performing the
following work on the machine:
 Changing the dies
 Cleaning, adjustment or maintenance
 Repairs
The outlet pressure of the compressor must be regulated so that a maximum pressure of
7 bars (101 psi) in the device is never exceeded. A pressure higher than 7 bars can
damage the device and cause serious injuries to the operator.
The device operates with a pressure of 5-7 bars. It is designed to give the best results for
an air pressure of 6 bars. Permanent operation with a pressure above 6 bars increases
wear.
1.2 Nameplate and “CE” marking