DATAPLOT GmbH
Gutenbergstraße 15
24558 Henstedt-Ulzburg
Germany
Telephone: +49 4193 995-0 Fax: +49 4193 995-220
www.dataplot.de
Page 12 / 28
11.
Tighten the two front screws on the lower bracket.
12.
Slide the upper die several times completely into the
lower die and control that the upper die is centred in
the lower die without snagging.
13.
Connect the compressed air hose.
14.
Drive the finger guard with the manual operation lever
slowly downwards and control that the upper die is
centred in the lower die without snagging. If this is not
the case, adjust the die as described in Section 5.1.
Faulty adjustment causes poor results and can damage the die. Such damage is not under
warranty!