Page | 74
3.
Configuring for VGA;
Execute the following instructions in u-boot mode to configure for VGA
display mode;
OMAP3 SBC8140 #
setenv defaultdisplay lcd
OMAP3 SBC8140 #
setenv dispmode VGA
OMAP3 SBC8140 #
saveenv
4.
Configuring for LVDS;
Execute the following instructions in u-boot mode to configure for LVDS
display mode;
OMAP3 SBC8140 #
setenv defaultdisplay lcd
OMAP3 SBC8140 #
setenv dispmode LVDS
OMAP3 SBC8140 #
saveenv
3.8
Tests and Demonstrations
This section will carry out many tests on the SBC8140s devices and also
demonstrations of the Android and DVSDK systems.
Note:
The following tests are all implemented by entering instructions in a
HyperTerminal window.
3.8.1
Testing LEDs
1.
Execute the following instructions to test LED0;
root@SBC8140:#
echo 1 > /sys/class/leds/led0/brightness
root@SBC8140:#
echo 0 > /sys/class/leds/led0/brightness
2.
Execute the following instructions to test LED1;
root@SBC8140:#
echo 1 > /sys/class/leds/led1/brightness
root@SBC8140:#
echo 0 > /sys/class/leds/led1/brightness
3.
Execute the following instructions to test LED2;
root@SBC8140:#
echo 1 > /sys/class/leds/led2/brightness
Содержание SBC8140
