Embest SBC8140, Руководство пользователя

Страница: 74 / 144

Page | 68
No device for DAI omap-mcbsp-dai-0
No device for DAI omap-mcbsp-dai-1
No device for DAI omap-mcbsp-dai-2
No device for DAI omap-mcbsp-dai-3
No device for DAI omap-mcbsp-dai-4
OMAP3 SBC8140 SoC init
asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
ALSA device list:
#0: omap3sbc8140 (twl4030)
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Power Management for TI OMAP3.
Unable to set L3 frequency (400000000)
Switched to new clocking rate (Crystal/Core/MPU): 26.0/266/1000
MHz
IVA2 clocking rate: 800 MHz
SmartReflex driver initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant
c rev 3
Console: switching to colour frame buffer device 60x34
regulator_init_complete: incomplete constraints, leaving VDVI
on
regulator_init_complete: incomplete constraints, leaving VDAC
on
hub 1-1:1.0: USB hub found
regulator_init_complete: incomplete constraints, leaving VMMC1
on
hub 1-1:1.0: 4 ports detected
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00
UTC (946684800)
mmc0: host does not support reading read-only switch. assuming
write-enable.
mmc0: new high speed SD card at address 1234
mmcblk0: mmc0:1234 SA02G 1.85 GiB
mmcblk0: p1
tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87
tvp514x 2-005d: Unable to detect decoder
tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87
tvp514x 2-005d: Unable to detect decoder
tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87
tvp514x 2-005d: Unable to detect decoder
tvp514x 2-005d: chip id mismatch msb:0x87 lsb:0x87