12
31. Finally the hydraulic control handle must be
installed. Using a pair of needle nose pliers,
remove the cotter pin that secures the handle
pivot pin to the valve. Remove the pivot pin.
Once the pivot pin is removed, then the handle
will come free.
32. Fit the slotted end of the handle into the lower
pivot, position the handle so that the hole in the
handle lines up with the pivot hole. Carefully
insert the pivot pin.
33. Using needle nose pliers, secure the pivot pin
by re-inserting the cotter pin. Test the function
of the handle to ensure everything is assembled
properly.
Congratulations on
successfully completing assembly of
the
WE230 Woodsplitter
