background image

12

2.7  OPERATING SAFETY

1.  Read  and  understand  operator's  manual  before 

starting.  Review safety instructions annually.

2.  Stop  and  disable  engine,  remove  ignition  key 

and  place  in  your  pocket  and  wait  for  all  mov-
ing  parts  to  stop  before  servicing,  adjusting  or 
repairing.

3.  To  prevent  electrical  shocks,  do  not  operate 

this  generator  in  the  rain  or  with  wet  hands.    It  
should  be  grounded  in  damp  or  highly  conduc-
tive conditions.

4.  Close  and  secure  all  guards,  deflectors  and 

shields before starting and operating.

5.  Do  not  connect  the  generator  to  a  commercial 

power line.

8.  Do  not  operate  with  damaged  or  defective 

extension  cords,  or  power  cords.    Never  oper-
ate  any  electrical  equipment  with  damaged  or 
defective cords.

9.  Do not operate this generator in areas with poor 

ventilation.    The  exhaust  fumes  contain  carbon 
monoxide,  a  poisonous,  odorless,  invisible  gas.  
Prolonged  exposure  can  lead  to  unconscious-
ness and death.

10.  Do  not  refuel  the  engine  while  it  is  in  opera-

tion  or  still  hot.    Do  not  refuel  the  engine  near 
open  fl ames,  pilot  lights  or  sparking  electrical 
devices  (e.g.  power  tools,  welders  or  grinders).  
Do  not  operate  the  generator  near  fl ammable 
products. 

11.  The  engine  should  be  refueled  in  a  well-lit  area.  

Avoid fuel spillage.

12.  Never  allow  children  or  unauthorized  people  to 

operate or be around this machine.

13.  Keep  the  working  area  clean  and  free  of  de-

bris  to  prevent  tripping.    Operate  only  on  level 
ground.

14.  Do  not  cover  the  generator  while  in  operation.  

Overheating  can  result  in  damaged  equip-
ment.

15.  For  storage,  do  not  cover  the  generator  until  it 

has cooled down completely.

16.  The  ambient  temperature  should  not  exceed 

100° F/40° C.

2.8  REFUELING SAFETY

1.  Handle fuel with care.  It is highly fl ammable.

2.  Allow engine to cool for 5 minutes before refuel-

ling.  Clean up spilled fuel before restarting 
engine.

3.  Do not refuel the machine 

while smoking or when near 
open fl ame or sparks.

4.  Fill fuel tank outdoors.

5.  Prevent fi res by keeping machine clean of accu-

mulated trash, grease and debris.

2.9  STORAGE SAFETY

1.  Store the unit in an area away from human 

activity.

2.  Do not allow children to play on or around the 

stored machine.

3.  Store the unit in a dry, level area.  Support the 

frame with planks if required.

Содержание Wallenstein EC2500









































Отзывы: