10
2.3 SAFETY TRAINING
1. Safety is a primary concern in the design and
manufacture of our products. Unfortunately,
our eff orts to provide safe equipment can
be wiped out by a single careless act of an
operator or bystander.
2. In addition to the design and confi guration of
equipment, hazard control and accident pre-
vention are dependent upon the awareness,
concern, prudence and proper training of
personnel involved in the operation, transport,
maintenance and storage of this equipment.
3. It has been said, "The
best safety feature is an
informed, careful opera-
tor." We ask you to be that
kind of an operator. It is the
operator's responsibility to read and under-
stand ALL Safety and Using instructions in the
manual and to follow these. Accidents can be
avoided.
4. Working with unfamiliar equipment can
lead to careless injuries. Read this manual
before assembly or using, to acquaint
yourself with the machine. If this machine
is used by any person other than yourself,
or is loaned or rented, it is the machine
owner's responsibility to make certain that
the operator, prior to using:
a. Reads and understands the operator's
manuals.
b. Is instructed in safe and proper use.
5. Know your controls and how to stop engine
and machine quickly in an emergency. Read
this manual and the one provided with your
engine.
6. Train all new personnel and review instruc-
tions frequently with existing workers. Be
certain only a properly trained and physically
able person will use the machinery. A person
who has not read and understood all using
and safety instructions is not qualifi ed to use
the machine. An untrained operator exposes
himself and bystanders to possible serious in-
jury or death. If the elderly are assisting with
the work, their physical limitations need to be
recognized and accommodated.
2.4 SAFETY SIGNS
1. Keep safety signs clean and legible at all
times.
2. Replace safety signs that are missing or have
become illegible.
3. Replaced parts that displayed a safety sign
should also display the current sign.
4. Safety signs displayed in Section 3 each have
a part number in the lower right hand corner.
Use this part number when ordering replace-
ment parts.
5. Safety signs are available from your author-
ized Distributor or Dealer Parts Department or
the factory.
How to Install Safety Signs:
•
Be sure that the installation area is clean and
dry.
•
Be sure temperature is above 50°F (10°C).
•
Determine exact position before you remove
the backing paper.
•
Remove the smallest portion of the split back-
ing paper.
•
Align the sign over the specifi ed area and
carefully press the small portion with the ex-
posed sticky backing in place.
•
Slowly peel back the remaining paper and
carefully smooth the remaining portion of the
sign in place.
•
Small air pockets can be pierced with a pin
and smoothed out using the piece of sign
backing paper.
