EMAK EF105J, Руководство пользователя

Страница: 22 / 30

MACHINE MAINTENANCE ENGLISH
7.3.2 WASHING
Avoid washing with water in the vicinity of the electrical equipment on the control panel, accumulator, etc. Do not use high-pressure devices.
Perform washing in the following way:
•
Wash the mowing machine including the attached grass collection bin on an even surface.
• Wash the mowing mechanism from inside including the inner parts of the discharge tunnel.
• Remove the grass collection bin, wash it and leave it to dry freely.
• Sponge the plastic parts of the machine with soapy water.
• Slip a hose of the appropriate diameter onto the extension pieces placed on the cover of the mowing mechanism and rinse the mowing mechanism
with water for 10 minutes. Rinsing, which is carried out with the engine and mowing mechanism running, is to be carried out immediately after the
end of every mowing.
7.4 ACCUMULATOR MAINTENANCE
Perform accumulator maintenance according to the instructions included in the accumulator operating instructions.
7.5 ENGINE MAINTENANCE
Perform engine maintenance according to the instructions included in the engine operating instructions.
7.5.1 ENGINE OIL LEVEL CHECK
Perform the engine oil level check according to the instructions included in the engine operating instructions.
7.5.2 OIL CHANGE
The engine is provided with an oil drain screw.
•
Place a flat vessel with the capacity of 2 litres at minimum and prop up the machine on the opposite side of
the drain screw in order for all of the oil to will flow out from the engine
• Unscrew the drain screw and release the oil filler cap in order for the oil l flow out better and faster from the
engine.
• Screw the drain screw back on, fill the engine with the correct amount of oil specified (see the engine operat-
ing instructions) and close the oil filler cap.
• Dispose of the drained oil at the appropriate waste disposal site for the liquidation of used oils.
7.5.3 FUEL FILTER REPLACEMENT
Perform the replacement of the fuel filter according to the instructions included in the engine operating
instructions.
7.5.4 AIR FILTER MAINTENANCE
Perform maintenance according to the instructions included in the engine operating instructions.
7.5.5 SPARK PLUG MAINTENANCE
Perform maintenance according to the instructions included in the engine operating instructions.
7.6 LUBRICATION
Perform lubrication according to the lubrication chart, the
checks of functions including maintenance according to the
summary in section 7.1.
Bearings of tightening rollers, guiding rollers and bearings
of the mowing mechanism are self-lubricating.
Prior to machine storage for a longer period of time, lubri-
cate all places thoroughly which require the lubrication.
grease
SAE 30 oil
interval in hours
21