EMAK EF105J Скачать руководство пользователя страница 13

UNPACKING

ENGLISH

4 .  UNPACKING

The self-propelled mowing machine is delivered in crates reinforced with cratewood. Some machine components have been dismantled in the manufactur-
ing plant fortransport reasons. They will be reassembled before the machine is put into operation. Unpacking the machine and preparing it for operation is
performed by the vendor within the framework of service before sale.

4.1

CHECK AFTER UNPACKING 

After removing the wrapping take the machine down carefully from the pallet - use the ramps to prevent damage to the machine.. Check if the machine was
not damaged during  transport. Also unpack all dismantled components and check them.
The basic packaging includes:

mowing machine

steering wheel

seat

grass collection bin (it is partially dismantled and is in the cardboard box together with the suspension, connecting parts and two triangular selfadhe-
sive yellow labels)

documentation (packaging document, mowing machine user's manual, engine operating instructions, accumulator operating instructions, Service book)

4.1.1 DISPOSAL OF PACKAGING

After the unpacking the machine it is necessary to dispose of the wrapping. When disposing, observe the respective law on waste materials valid in the coun-
try of the machine user. Separate the packaging material according to the appropriate classification of packaging. This procedure can be entrusted to a spe-
cialized firm.

4.2

PREPARATION FOR START UP

With respect to the technical character of this work, the mowing machine preparation 
for start up is carried out by your vendor (in accordance with the instructions of the machine 
manufacturer).

4.2.1  STEERING WHEEL ASSEMBLY

Place the machine on an even surface and align the front wheels into a straight direction.
Mount the steering wheel and secure it by the supplied pin.

4.2.2 SEAT ASSEMBLY

Remove the seat wrapping cover.
Put the seat on its place in the machine and fasten itusing the screws just 
as they are preassembled in the seat.

4.2.3 ADJUSTMENT OF SEAT POSITION

Adjust the position of the seat in the following way:
Loosen the screws with plastic roses.
Shift the seat forward or backward to the desired position.
Retighten the screws with plastic roses.

4.2.4 ACCUMULATOR CONNECTION

When starting up  the accumulator, proceed according to the instructions stated in the Accumulator operating instructions.
The accumulator is placed in a box under the seat (at the SJ2... and SJ4... machine type) or under the front bonnet (at the SJ8... a SG8... machine type).
Loosen the screws on the accumulator pole outlets.
Connect the red wire to the (+) pole of the accumulator and retighten the screw.
Connect the brown wire to the (–) pole of the accumulator and retighten the screw.

WARNING:

Reverse connection of the wires than stated above will result in damage to the machine.

When disconnecting the accumulator, always disconnect the (–) pole first.

Follow the instructions for maintenance stated in the accumulator operating instructions.

12

Содержание EF105J































Отзывы: