Emagic Emi 2/6 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 66

Emagic Emi 2/6 Скачать руководство пользователя страница 27

Installation and Updating

27

Owner’s Manual

Version 1.1

2

2

2

2

insert the Windows 98 Second Edition CD-ROM during this
phase of the installation.

•

You may encounter a number of version conflict boxes simi-
lar to the following: “A file being copied is older than the file
currently on your computer. It is recommended that you
keep your existing file.”

•

Click the “Yes” button for each of these version conflict box-
es.

•

After a few moments, your installation will have been com-
pleted successfully.

N.B. It is possible that the EMI 2|6 may need to be re initial-
ized following installation on Windows 98 SE. To do so, simply
restart Windows.

Installation on Windows 2000

•

Start and boot your computer completely. Insert the EMI 2|6
drivers CD-ROM into your computer’s CD-ROM drive.

•

Connect the EMI 2|6 to any of your computer’s unused USB
ports via the supplied USB cable.

•

The “Add New Hardware” Wizard will automatically
launch.

•

Click on the “Next” button.

•

Select “Search for a suitable driver for my device (recom-
mended)

•

Click on the “Next” button.

•

Select an optional search location, if necessary. If you are in-
stalling the driver from CD-ROM, check the CD-ROM
drive option.

•

Click on the “Next” button.

•

The following message will appear on-screen: “The wizard
found a driver for the following device: Emagic EMI USB
Device”.

•

Click on the “Next” button.

•

The: “Completing the Found New Hardware Wizard,
Emagic EMI USB Device, Windows has finished installing
the software for this device. The hardware you installed will

«
...
25
26
27
28
29
...
»

Содержание Emi 2/6



































































Отзывы:

Нет отзывов