Emagic Emi 2/6 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 66

Emagic Emi 2/6 Скачать руководство пользователя страница 10

10

EMI 2|6 Hardware

Emagic

EMI 2|6

5 EMI 2|6 Hardware

In this chapter, the connectors and hardware features of the
EMI 2|6 are explained. You will also find several application
examples outlined here.

Connectors, Switches and Displays

USB Connector

This is the jack used for the connection of the EMI 2|6 to your
computer. A USB cable is supplied. The EMI 2|6 is compatible
with the Universal Serial Bus Revision 1.1 or higher.

When the EMI 2|6 is connected to the USB port of the com-
puter, and the computer is turned on, the blue power LED will
be illuminated. The EMI 2|6 will be ready for use after a self-
initialization procedure which takes approximately five sec-
onds.

Please note that this assumes that the operating system is pro-
perly installed and configured. Also note that only the blue
power indicator LED will be lit until all drivers are loaded and
available for use by the EMI 2|6. The EMI 2|6 can not be used
when it is not connected to the computer or when the computer
is switched off.

Analog Inputs and Outputs

The EMI 2|6 is equipped with RCA connectors offering two
analog inputs and six analog outputs. The output level is
2.8Vpp or 1Vrms, which corresponds to approx. 0dBV or

+

2.2dBu respectively. This makes the EMI 2|6 compatible

with (consumer) levels of

−

10dBV (CD players and other “line”

devices) as well as with levels of

+

4dBu (professional studio

equipment). A green LED that indicates level is available for
each input and output.

«
...
8
9
10
11
12
...
»

Содержание Emi 2/6



































































Отзывы:

Нет отзывов