Chapter 3: Troubleshooting
44
Recovering pre-installed software and
drivers
As a troubleshooting step, you may need to reinstall the
software and device drivers that came pre-installed on
your computer from the factory. You can recover using
either your hard drive or the backup discs you have
created.
•
New software—If you need to recover software that
did
not
come pre-installed on your computer, you
need to follow that software’s installation
instructions.
To recover your pre-installed software and drivers:
1 Click (Start), All Programs, eMachines, then click
eMachines Recovery Management.
eMachines
Recovery Management
opens.
- OR -
If you are recovering from your driver and
application recovery disc, insert it into the disc drive,
then go to Step 3 after the
eMachines Application
Recovery
main menu
opens.
2 Click the Restore tab, then click Reinstall
applications/drivers. The
eMachines Application
Recovery
main menu
opens.
3 Click Contents. A list of software and device drivers
opens.
4 Click the install icon for the item you want to install,
then follow the on-screen prompts to complete the
installation. Repeat this step for each item you want
to reinstall.
Содержание EL1358G
