9
PPC-E5 BIOS Defaults
The PPC-E5 uses a General Software BIOS. To enter the BIOS you must press the <Del> key when
prompted. The following BIOS screen shots indicate the BIOS options and the default factory values of
each option. Note: these factory set options should not require changing.
+------------------------------------------------------------------------------+
| |
| System Bios Setup - Utility v4.2 |
| (C) 1999 General Software, Inc. All rights reserved |
+------------------------------------------------------------------------------+
| |
| |
| >Basic CMOS Configuration |
| Custom Configuration |
| Shadow Configuration |
| Reset CMOS to last known values |
| Reset CMOS to factory defaults |
| Write to CMOS and Exit |
| Exit without changing CMOS |
| |
+------------------------------------------------------------------------------+
| <Esc> to continue (no save) |
+------------------------------------------------------------------------------+
| System Bios Setup - Basic CMOS Configuration |
| (C) 1999 General Software, Inc. All rights reserved |
+---------------------------+--------------------+-----------------------------+
| DRIVE ASSIGNMENT ORDER: | Date: Apr 24, 2001 | Typematic Delay : Disabled |
| Drive A: fd0 | Time: 23 : 44 : 42 | Typematic Rate : 30 cps |
| Drive B: fd1 | NumLock: Disabled | Seek at Boot : None |
| Drive C: (None) +--------------------+ Show "Hit Del" : Enabled |
| Drive D: (None) | BOOT ORDER: | Config Box : Enabled |
| Drive E: (None) | Boot 1st: Drive C: | F1 Error Wait : Disabled |
| Drive F: (None) | Boot 2nd: (None) | Parity Checking : (Unused) |
| Drive G: (None) | Boot 3rd: (None) | Memory Test Tick : Disabled |
| Drive H: (None) | Boot 4th: (None) | Test Above 1 MB : Enabled |
| Drive I: (None) | Boot 5th: (None) | Long Memory Test : (Unused) |
| Drive J: (None) | Boot 6th: (None) | Hexadecimal Case : Upper |
| Drive K: (None) +--------------------+-----------------+-----------+
| (Loader): (Unused) | IDE DRIVE GEOMETRY: Sect Hds Cyls | Memory |
+---------------------------+ Ide 0: (Unused) | Base: |
| FLOPPY DRIVE TYPES: | Ide 1: (Unused) | 640KB |
| Floppy 0: 1.44 MB, 3.5" | Ide 2: (Unused) | Ext: |
| Floppy 1:>1.44 MB, 3.5" | Ide 3: (Unused) | 15MB |
+---------------------------+--------------------------------------+-----------+
| ^E/^X/<Tab> to select or +/- to modify |
<Esc> to return to main menu
