EMAC PPC-E5, Руководство пользователя

Страница: 14 / 15

14
Appendix B
Jumper Settings
JP1 LCD Voltage
Jumper Setting
No Jumper Not Available
Pins 1 & 2* 5v LCD output
Pins 2 & 3 3V LCD output
* Default setting, for Kyocera LCD.
JP2 LCD Type
Jumper Setting
Pins 1 & 2 Special STN
Pins 2 & 3* TFT and Standard STN displays
* Default setting, should work for most LCD screens
JP3 Serial Port (COM3 / COM4) Configuration
Row of jumpers closest to ABC letters
Jumper Shorting AB* Com 4 on IRQ 11
Jumper Shorting BC
Com 4 on IRQ 7
Second row of jumpers next to the above jumpers
Jumper shorting AB* Com 3 on IRQ 5
Jumper Shorting BC
Com 3 on IRQ 9
* Default Setting
JP4 Ethernet Settings
Config # I/O IRQ ROM Media Jumper
0 0x300 5 No 10bT A B C
1* 0x320 9 No 10bT A B
2 0x340 11 No 10bT A C
3 0x360 7 No 10bT A
4 NA
5 NA
6 NA
7 0x300 5 yes 10bT none
Note: Config #7 is for Remote Boot and expects a 16kb boot ROM at address CC000. This can be
accomplished by putting the boot ROM in the DOC socket.
* Default setting