EM Phaser EA2500D, Инструкция по установке и эксплуатации

Страница: 5 / 32

5
1. DESIGN FEATURES
■
DIGITAL CAR AUDIO AMPLIFIER for a cross-over controlled amplification of satellite speaker
systems, kickwoofers and subwoofer systems
■
REMOTE LOWPASS LEVEL CONTROL
to set the subwoofer volume level from the driver’s seat
■
REGULATED MOSFET POWER SUPPLY
to sustain very high output power into low impan-
dance loads
■
1 OHM LOAD STABILITY
to drive speaker systems with very low impedance, sustaining very
high power output levels
■
ELECTRONIC CROSSOVER with 12 dB/oct. or 18/24 dB/oct. slope steepness and fully varia-
ble cit-in / cut-off frequencies for highpass, bandpass or subsonic filtering of the individual channels
■
2AWG POWER INPUT TERMINALS for direct connection of 35mm 2 main power wires
■
ADVANCED PROTECTION CIRCUITRY
to safe-guard the amplifier from short-circuits at the
speaker outputs, DC offset voltage at the outputs and overheating of power electronics
■
ADJUSTABLE RCA INPUT SENSITIVITY
from 200mV to 6V to provide a good match with the
line-output levels of almost any head-unit
■
EXTERNAL FUSES
on the input side-panel, equipped with Maxi type fuse holders
EM Digital 4/5-CH Manual 2004 26.03.2004 11:39 Uhr Seite 5