Page 19 of 25
S-218 User Manual
v1 October 2019
6.4 - System Connectivity
6.4.1 - Cable Length and Specification
All cables add to the system impedance, and as such careful selection is required depending on your
amplifier setup and overall system impedance. Cables with a cross sectional area of less than
2.5mm
2
should not be used. Recommended maximum cable lengths are given below:
Conductor Area
Maximum Recommended Cable Length
2 ohms
4 ohms
8 ohms
2.5mm
2
(14 AWG)
15m
30m
60m
4.0mm
2
(12 AWG)
20m
40m
80m
6.0mm
2
(10 AWG)
30m
60m
120m