Elvox 52D0/EIR, Инструкция по установке и эксплуатации, Страница: 50 / 64

50
LABLE [PRESET 1]
INS
LOW CASE [a b c d e f g h I j]
ZOOM+DELETE CONTENTS
FOCUS+CHANGE CONTENTS
FOCUS-CHANGE MARKER
ROCKER CHOOSE CONTENTS
OPEN: SURE CLOSE:BACK
Figure 3.3.16
- PRESET PTZ
Enter the PRESET PTZ menu to edit preset scene. Use the joystick or direction buttons to move PTZ to the desired scene and
then press the IRIS+ to confirm the settings and return to the previous menu, or press IRIS- to cancel settings.
Note: the setting of preset scene will be restricted by the limit stops if defined.
- CLEAR PRESET
This feature is used for clearing the current preset.
3.3.5 PATROLS
The PATROLS settings menu is shown in Figure 3.3.17
- PATROLS NUMBER
The number of patrol under current operation. The dome provides 8 patrols numbering from 1 to 8.
NUM PRESET DWELL SPEED
1 0 6 30
2 0 6 30
3 0 6 30
4 0 6 30
5 0 6 30
6 0 6 30
7 0 6 30
DONE: OPEN QUIT: CLOSE
Figure 3.3.16 Figure 3.3.18
PATROLS
PATROL NUM
1
EDIT PATROL
PREVIEW
DELE PATH
BACK EXIT
- EDIT PATROL
The EDIT PATROL settings menu is shown in Figure 3.3.18. A patrol can be configured with 32 presets.
To edit a patrol:
1. Move the joystick up and down or Up and Down direction buttons to select the preset to be edited.
2. Move the joystick left and right or Left and Right direction buttons to select among PRESET, DWELL TIME and SPEED.
3. After having selected the item to be edited, move the joystick up and down or Up and Down direction buttons to set values.
4. Follow the same steps to edit the other presets. Use the joystick or the Right direction button to enter the next page.
The preset edited in the patrol can be modified or deleted as well. In default setting, the preset number is initialized as 0, dwell
time is 6 seconds (0-30 seconds selectable) and the patrol speed is level 30 (level 1-40 selectable).
5. Press IRIS+ to save the current settings or press IRIS- to cancel settings and return to the previous menu.
GB