Elvox 52D0/EIR, Инструкция по установке и эксплуатации, Страница: 49 / 64

49
- CLEAR STOPS
The defined limit stops can be cleared by this menu.
- ELEVATION SET
When this function is set to ON, the tile angle of speed dome ranges from -10°to 90°; while this function is set to OFF, the tilt
angle of speed dome ranges from -5°to 90°.
3.3.4 PRESETS
The PRESETS menu is displayed as shown in Figure 3.3.14.
PRESETS
PRESET NUM 1
[UNDEFINED]
<EDIT LABEL>
<PRESET PTZ>
CLEAR PRESET
BACK EXIT
Figure 3.3.14
- PRESET NUMBER
The dome provides 256 presets. The PRESET NUM displays the preset under current operation. If the preset has been defined,
the corresponding number will appear; while no preset is defined, it will display UNDEFINED. The presets which are predefined
for specific functions will not be displayed and no change is allowable. Please refer to page 9 for presets with specific functions.
- EDIT LABEL
LABLE [PRESET 1]
INS
ZOOM+DELETE CONTENTS
FOCUS+CHANGE CONTENTS
FOCUS-CHANGE MARKER
ROCKER CHOOSE CONTENTS
OPEN: SURE CLOSE:BACK
Figure 3.3.15
The Preset Label menu is shown in Figure 3.3.15.
Operate the following stops to edit the preset label:
a. Move the cursor beside [PRESET].
b. Press the FOCUS+ button to switch input characters among numbers, lowercases, capitals and symbols. Refer to Fi-
gure3.3.15. Move the Left and Right buttons to position the cursor beside a character and press FOCUS+ to enter selec-
tion.
c. To clear a character, use the FOCUS- button to position the cursor under the character to be deleted, and then press ZOOM+.
To modify a character, use the FOCUS- button to position the cursor under the character to be modified, and then enter the
new character by following Step b.
d. When label is completed, press IRIS+ to save the current settings and return to the previous menu.
Use the following functions buttons on the keyboard or the DVR front panel to edit preset label:
ZOOM- : switch between INS and OVR mode.
INS: insert character at the position of cursor;
OVR: enter the character at the position of cursor and overwrite the original character.
ZOOM+ : delete the character at the position of cursor.
FOCUS+ : switch input characters among numbers, lowercases, capitals and symbols.
FOCUS- : move the cursor at the preset label.
IRIS+ : Confirm and save the current settings and return to the previous menu.
IRIS- : Cancel the current operation and return to the previous menu.
Direction Buttons : move the cursor to select the numbers/lowercases/capitals/symbols.
GB