30
GB
FITTING THE DOOR
HANDLE
Fit the door handle using the screws supplied.
PLACEMENT
__________________________________________________________
The drying cabinet is only intended for use indoors in a dry area.
__________________________________________________________
Do not place the drying cabinet in an area where high-pressure water is used for cleaning.
__________________________________________________________
1. Pre-drilled hole
2. Fixing screw with washer
3. Wall plug
4. Wall behind drying cabinet
5. Spacer
6. Rear wall of drying cabinet
7. Spirit level
8. Allen key
9. Cover plug
• The drying cabinet must stand on a flat
surface, and be supported by all four feet.
Use the supplied Allen key to adjust all four
adjustable feet through the holes in the
base of the drying cabinet.
Press the four cover plugs into the holes
after adjustment.
• The cabinet must be secured to the wall to
prevent it from tipping over.
1 Open the door and drill two 8 mm holes in
the wall through the pre-drilled holes in the
rear of the cabinet.
2 Insert the wall plugs into the wall. Slide a
spacer on to each screw and fit them with
the washers as shown. The screws are
found in the installation kit.
4
3
6
5
2
7
8
9
1
____________________________
WARNING!
The drying cabinet must not be used unless it has
been secured to the wall, as it could tip forwards
otherwise.
____________________________
