14
Getting started
© 2021, Elon Group AB. All rights reserved.
Before first use
Calibrate the machine
Calibration optimizes the automatic load detection. This minimizes the consumption of energy and water, saves money
and reduces the washing time.
1.
Make sure the machine is empty.
2.
Plug in the power cord.
3.
Press
to turn on the machine.
4.
Within 10 seconds after the machine was turned on, touch and hold
and
until
t19
is displayed.
5.
Press
.
NOTE! Calibration is completed when the drum stops rotating and digits are displayed.
Run an empty washing cycle
Make sure that the machine is installed and calibrated properly.
1.
Plug in the power cord.
2.
Open the water tap.
3.
Start a Cotton programme at 90 °C.
NOTE! Do not put any clothes or detergent in the machine.
The machine is ready for use when the programme has completed.
