88
GB
Installation
Remove transit bolts
Remove the bolts as follows:
1. Loosen the 4 bolts with a spanner and then remove them.
2. Plug the holes with the transit hole plugs.
3. Keep the transit bolts for future use.
Levelling the appliance
1.
Check that the feet are firmly attached to the cabinet. If not, screw them in and
tighten the nuts.
2.
Loosen the lock nut and turn each foot until it makes firm contact with the floor.
3. Adjust the feet and lock them with a spanner, making sure the machine is
steady.
WARNING!
•
You must remove the transit bolts from the rear before using the product.
•
You’ll need the transit bolts again if you move the product, so make sure
you keep them in a safe place.
WARNING!
•
The lock nuts on all four feet must be screwed tightly against the housing.
2
3
4
1
Lock nut
Foot
Lower
Raise
Содержание CTM5214V
