16
CKK2076X | CKK2151X
EN
AFTER USE
1. Disconnect the power base from the electrical outlet.
2. Let the percolator cool down completely.
3. Remove the cover carefully by pulling the knob.
4. Remove the coffee basket from the pump tube assembly.
5. Remove the coffee basket lid and pour out the ground coffee.
6. Remove the pump tube assembly.
7. Clean all parts by following the ”Maintenance” section.
Caution:
Use oven mitts to avoid burns if you suspect that the parts might still
be hot.
MAINTENANCE
CLEANING AND STORAGE
• Disconnect the power base from the electrical outlet.
• Ensure the appliance has completely cooled down.
• Disassemble the parts as described in the section ”After use”.
• The percolator cover, basket, basket lid and pump tube assembly can all be
placed in the upper rack of a dishwasher or washed in warm soapy water
and rinsed thoroughly.
• To clean the main body and power base, simply wipe with a clean, damp cloth
and dry carefully before storing.
Important:
Never wash the percolator’s main body or power base and power
cord in a dishwasher. Never immerse them in water or other liquids. This will
damage the appliance.
• Store the appliance in a cool, dry area with the cover off.
Important:
Do not use scouring agents or harsh cleaners
on any part of the percolator.
Important:
The washer at the bottom of the pump tube
must move freely. Should ground coffee become trap-
ped near the washer, loosen it with a toothpick and
then run under tap water to clean.
OPERATION
Once brewing is completed, remove the percolator from the power base and pour
the coffee.
Caution:
Do not touch the stainless steel parts of the percolator, as they will be hot.
Use handle and knob.
Warning:
Be certain that the percolating process has stopped completely before
pouring or removing the cover.
