34
35
© 2021, Elon Group AB. All rights reserved.
Hob
Hob
Worktop
Worktop
Clip
Clip
The clips must not touch the underside of the
worktop after installation (see diagram).
Caution
1. The ceramic hob must be installed by a qualified electrician.
Contact us if you need assistance. Do not try to do this work
yourself.
2. The ceramic hob should not be installed above a refrigerated
appliance, dishwasher or tumble dryer.
3. Install the ceramic hob so that heat can be ventilated away
easily (otherwise its reliability may be reduced).
4. Walls and the induced heat zone above the work surface
must be heat-resistant.
5. Laminates and adhesives must also be heat-resistant.
6. Do not use a steam cleaner to clean the hob.
Connect the hob to the mains supply
Connect to the mains supply according to the relevant standard
(use a single-pole circuit breaker). See the instructions for
connection below.
1. Replacement of the cable (due to damage or replacement
for some other reason) should be carried out by a qualified
electrician.
2. If the appliance will be directly connected to the mains supply
a multi-pole circuit breaker must be installed (min. distance
between contacts: 3 mm).
3. It is the responsibility of the installer to ensure that electrical
connections are made correctly and meet the relevant safety
regulations.
4. The cable must not be bent or trapped.
5. Check the cable regularly! If it needs to be replaced this must
be done by a qualified electrician.
The underside of the hob and the power cord
are not accessible after installation.
Содержание CKH2662S
