80
81
© 2021, Elon Group AB. All rights reserved.
Starting a wash cycle
1. Pull out the lower and upper baskets, load the dishes and push them back.
It is recommended that you load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug in the socket. For information on the electrical supply refer to the last page “Product fiche”.
Make sure that the water supply is turned on at full pressure.
4. Close the door and press the Power button to turn on the machine.
5. Choose a program, the indicator light will turn on. Then press the Start/Pause button, the dishwasher will start its cycle.
Changing the program mid-cycle
A wash cycle can only be changed if it has been running for a short time, otherwise the detergent may have already been released
and the dishwasher may have already drained the wash water. If this is the case, the dishwasher needs to be reset and the deter-
gent dispenser must be refilled. To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the wash cycle.
2. Press and hold the Program button for more than 3 seconds to cancel the program.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds the dishwasher will start.
Forget to add a dish?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the case, follow the instructions below:
1. Press the Start/Pause button to pause the wash cycle.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button, after 10 seconds the dishwasher will start.
WARNING
It is dangerous to open the door mid-cycle, as hot steam may
scald you.
3 sec
After 5 sec
Содержание CDM2451V
Страница 135: ...135 2021 Elon Group AB All rights reserved...