Elvid OCM-7PWV, Руководство пользователя

Страница: 7 / 17

12 13
THREE-STUD OR V-MOUNT
The FieldVision comes with an adapter panel that lets you
mount a Three-Stud or V-mount battery plate onto the back
of the monitor. These more powerful batteries provide longer
run-time than camera batteries, so you can work for longer
without having to recharge or change your battery. To install
the large battery adapter panel, follow these steps:
To turn on the FieldVision: If your battery plugs into the
battery power input, push the power switch in to the
“BATT” position. If your battery plugs into the 4-pin XLR
DC power input, push the power switch in to the “12V”
position. 1. With the smooth side of
the adapter panel facing
up, place the panel on the
back of the monitor. Align
the top two screw holes
of the adapter panel with
the corresponding screw
holes in the back of the
monitor. The battery
power input should
be visible through the
bottom opening in the
adapter panel.
2. Insert the four included
screws into the adapter
panel and use a Phillips-
head screwdriver to
screw them in until fully
tightened. Be careful not
to overtighten.
3. Refer to your battery
plate’s instructions to
install your battery plate
and battery pack.
POWerING
ON & OFF