Elvid OCM-7PWV, Руководство пользователя

Страница: 16 / 17

30 31
TrOuBLe
sHOOTING
PrOBLeM sOLuTION
The FieldVision will not
turn on. • If you are powering the
FieldVision with a battery, make
sure that the battery is fully
charged and that the battery
plate is properly connected.
• If you are powering the
FieldVision via AC power, make
sure that the power and tally
cable and the 12 V DC adapter
are fully plugged in, and that
your AC power source is reliable.
Try switching AC power sources.
• Make sure the FieldVision’s
power switch is set to the proper
power input.
The screen displays only
a black and white image. • Check whether the color
saturation is properly configured.
• Make sure the Check Field and
Peaking modes are disabled.
PrOBLeM sOLuTION
(cont'd) • If you are using component video,
make sure that all the cables are
attached and fully plugged into the
proper inputs.
The FieldVision is
turned on but there is
no onscreen image. • Make sure that the correct input
signal is selected.
• Check your cables to make sure
they are properly connected.
• Check your cables to make sure
they are reliable.
“No signal” or
“not supported” is
displayed onscreen. Make sure the video resolution
and frame rate are supported by
the monitor. See the Supported
Resolutions and Frame Rates chart
on page 26-29.
The colors are
inaccurate. • Check your cables to make sure
they are properly connected.
• Make sure False Color mode is
disabled.
• Make sure your monitor is
properly calibrated.
•Check your cables to make sure
they are reliable.